World Trade Office Machine since 1978 文儀器材維修用心服務40年

鑽咀選配鑽紙機鑽咀需知

確認鑽紙機鑽的品牌如 Lihit & Uchida , SPC 等，不同品牌通常是不能兼容互換的
型號 (model) ，不同形號的可鑽紙的最大厚度是不同的，鑽咀 (Drill Bits) 自然要配翻合適的長度，通常是 25mm , 50 mm . 100mm
鑽咀的直徑，因為鑽咀是空心的，直徑代表鑽孔的大小，通常一般filling 用的是約 6mm 直徑

器材消耗品機油和色帶等 > Drill Bits & Protection Pad

Shop by Brand

6mm Drill Bit for Universal UNI250# (UNI250# 鑽孔機空心鑽咀) Drill depth of 50mm, Total length 78mm

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

UNI250#PAD

Protection Pad for Universal UNI250# (UNI250# 保護墊) 298mm (L) x 43mm(W) (每塊價錢)

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

VS10 drill bit

Uchida 6mm drill bit (鑽孔機空心鑽咀) for Uchida VS10 / VS15 Drill depth of 30mm, Total length 65mm

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

VS20 drill bit

Uchida 6 mm (Diameter) Replacement drill bit (鑽孔機空心鑽咀) for Uchida VS20 VS25 or VS55 Paper Drills. 6mm drilling diameter. handle up to a 50mm pile

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

P-255 P264

Lihit 6.35mm /5.5mm (直徑) paper Drill Bit (鑽咀) for Lihit 2001AA-6/ P2001A drilling machine Total Length 52 mm Conical Head Drill Capacity 25 mm

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

P-67

日本 Lihit P-67 6 mm (Diameter) Replacement drill bit (鑽孔機空心鑽咀) Lithit P2005 雙鑽孔機專用可用於台灣 KW tri 95B 雙鑽孔機日本製造

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

P-67

Nagel Green color code High-performance steel Paper Drill Bits ( Type 1 )-6mm made in Germany (鑽孔機空心鑽咀可用於Nagel /Kings KF-D150

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

ERB 6.5 mm 鈦合金空心鑽咀 for Nagel drilling machine (Made in Germany ) (鑽孔機空心鑽咀可用於NagelCitoborma 111 /Kings KF-D150

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

Replacement drill bit (台灣製造原裝空心鑽咀) for KW tri 95B 雙鑽孔機 6 mm (Diameter)

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

P404

P-404 Protection Board (30 x 107 mm) 適用 NO.2001A專用保護板 - 10塊/包 for Lihit P-2001-A (10pcs. /pack)

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

P405

P-405 Base Protection Board (27 x 300 mm) 適用 NO.2001AA/SIX 專用保護板 - 5塊/包 for Lihit P2001A / 2001AA-6 (5 pcs./pack )

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

P-60 drill bit

Lihit 6 mm (直徑) paper Drill Bit (鑽孔機空心鑽咀) for Lihit 1012/1013/1015/1017K 可通用 Total Length 80mm Conical Head Drill Capacity 50 mm

To fit a Uchida VS-10 or Uchida VS-15 paper drills ONLY due to reduced drill depth.
6mm drill diameter only. Drill depth of 30mm, Total length 65mm.
Standard 11mm shank.

維修保養服務

產品使用小知識

器材原理和選購建議

訂購送貨和付款