1. Determine MeetingBar A30 position
The mounting height affects your camera view. The recommended height is 1.1 m above the ground.
NOTE
Embedded installation is prohibited (For example: inside the wall, enclosed space).
2. Install mounting bracket
Step 4: Expansion Screws: φ6 * 30 mm. Hole depth: 6 mm, Hole diameter: 30 mm.
Step 5: Screws: 4*30 FAHOZN3+ (+)
3. Mount it to bracket
Screws: 1/4’’ -20 UNC
For a better pairing experience, we recommend starting the MeetingBar A30 first and then the CTP18. The MeetingBar A30 and CTP18 must be on the same LAN or connected to the same Wi-Fi before pairing and completing the setup.
You can power the CTP18 through PoE, as shown in the figure below.
After the deployment and connection are successful, please refer to Quick Setup to complete the setup wizard, and refer to Quick Usage to learn about getting started quickly.
NOTE
If you only use one display, please connect to HDMI 1 port. The functions of the VC hub/phone port and the VC Hub/ Internet port are different, and please pay attention to the connection method when using.
NOTE
Not included accessories requirements:
貨期: 一般訂貨期需2-3天出貨,如供應商缺貨,會已電郵通知客戶。
免運費: 商業區包運費、上門安裝和產品教授服務
代理商一年保用期: 獨家聯保計劃,如代理條款是需自攜到維修中心,我們免費升級到特快上門保養,增值售後服務比原廠保用 “更快和貼心
每年續保計劃: 定期為器材檢查、清理和加油等服務,器材更耐用而小壞,節省時間和維修開支