Sensor | Remote SensorPod |
Air Quality Indicator | Numeric & Colour Display |
Air changed 2 times per hour | 70 sq m (750 sq ft) |
Air Delivery Type | PureDirect |
Purification Levels | Washable Prefilter, Carbon Filter, HEPA Type Filter, UV (UltraViolet) Sterilization (紫外光消毒殺菌) |
Fan Speeds | Whisper, 1, 2, 3, Turbo |
Filter Change Indicator | Carbon layer ( 3 - 6 months ) HEPA filter ( 12 - 15 months ) UV Bulb ( 2 - 3 years ) |
Auto Mode | Yes |
Night Mode | Yes, dims the lights |
Timer Settings | 2/4/8/12 hours |
Dimensions | 10 x 10 x 28 in (263 x 263 x 726 mm) |
Weight | 6 Kg |
Noise Level | 32 - 66 db |
Power Consumption | 68 Watts |
Period of Warranty | 2 years |
AIR QUALITY DISPLAY Real-time Feedback
The revolutionary SensorPod™ evaluates the condition of your air by measuring
both small (PM2.5) and larger (PM10) particulate matter. It calculates the overall
air quality using a proprietary algorithm that is reactive to genuine increases in
pollutants without overreacting to someone entering the room or settling into
the couch.
The illuminated, color-coded display communicates good, moderate or poor
air quality and a numeric value provides a greater level of detail.
In AUTO mode, the purifier automatically adjusts the fan speed in response to
these air quality readings.
*The purifier will automatically adjust fan speeds based on the air quality readings
from SensorPod, and proprietary PureDirect™ technology will deliver purified air
throughout the room!
How often do I need to clean the dust sensor within SensorPod™? |
For the most accurate measurement of your air quality, we’d recommend you clean the surface of the dust sensor every 1-2 months. |
Cleaning the air quality sensor for Trusen z3000 The SensorPod™ uses an infrared light to detect particulate matter, so it is important that you clean the viewing chamber every 1-2 months to remove any dust or particles that may affect the accuracy of the sensor’s readings. 1. Turn-off the SensorPod by unplugging the power cord. 2. Open the easy-access door on the front side by pulling the door up at a 90° angle. 3. Use a damp cotton swab to wipe the lens and intake area of the dust sensor (Fig. M). 4. Use a dry cotton swab to wipe away any remaining moisture. 5. Close the cover by rotating the door back down and sliding it back into place until you hear a click. |
|
Where do I place the SensorPod™? Anywhere you want to measure the air quality within the room! | For optimal results, place the SensorPod™ up to 49 ft (15 m) away from the air purifier on a counter or table, within line of sight of the purifier. In Auto Mode, the purifier will work to distribute clean air until the SensorPod reads an acceptable level of air quality. |
Consumable Replacement Items
3 in 1 Filter Replacement Pack ((#AFHZ2000-01 ) @ $660 包括以下各一個 :